#
# $Id: macros.in,v 1.154.2.6 2005/07/21 01:45:44 jbj Exp $
#
# This is a global RPM configuration file. All changes made here will
# be lost when the rpm package is upgraded. Any per-system configuration
# should be added to /etc/rpm/macros, while per-user configuration should
# be added to ~/.rpmmacros.
#
#==============================================================================
# Macro naming conventions (preliminary):
#
# Macros that begin with an underscore are "local" in the sense that
# they (if used) will not be exported in rpm headers. Some macros
# that don't start with an underscore (but look like they should)
# are compatible with macros generated by rpm-2.5.x and will be made
# more consistent in a future release.
#
#==============================================================================
# ---- A macro that expands to nothing.
#
%nil %{!?nil}
#==============================================================================
# ---- filesystem macros.
#
%_usr /usr
%_usrsrc %{_usr}/src
%_var /var
#==============================================================================
# ---- Generally useful path macros.
#
%__awk gawk
%__bzip2 /usr/bin/bzip2
%__cat /bin/cat
%__chgrp /bin/chgrp
%__chmod /bin/chmod
%__chown /bin/chown
%__cp /bin/cp
%__cpio /bin/cpio
%__file /usr/bin/file
%__gpg /usr/bin/gpg
%__grep /bin/grep
%__gzip /usr/bin/gzip
%__id /usr/bin/id
%__install /usr/bin/install
%__ln_s ln -s
%__make /usr/bin/make
%__mkdir /bin/mkdir
%__mkdir_p /bin/mkdir -p
%__mv /bin/mv
%__patch /usr/bin/patch
%__perl /usr/bin/perl
%__pgp /usr/bin/pgp
%__python /usr/bin/python
%__rm /bin/rm
%__rsh /usr/bin/rsh
%__sed /bin/sed
%__ssh /usr/bin/ssh
%__tar /bin/tar
%__unzip /usr/bin/unzip
#==============================================================================
# ---- Build system path macros.
#
%__ar ar
%__as as
%__cc gcc
%__cpp gcc -E
%__cxx g++
%__ld /usr/bin/ld
%__nm /usr/bin/nm
%__objcopy /usr/bin/objcopy
%__objdump /usr/bin/objdump
%__ranlib ranlib
%__remsh %{__rsh}
%__strip /usr/bin/strip
# XXX avoid failures if tools are not installed when rpm is built.
%__libtoolize libtoolize
%__aclocal aclocal
%__autoheader autoheader
%__automake automake
%__autoconf autoconf
#==============================================================================
# Conditional build stuff.
# Check if symbol is defined.
# Example usage: %if %{defined with_foo} && %{undefined with_bar} ...
%defined() %{expand:%%{?%{1}:1}%%{!?%{1}:0}}
%undefined() %{expand:%%{?%{1}:0}%%{!?%{1}:1}}
# Shorthand for %{defined with_...}
%with() %{expand:%%{?with_%{1}:1}%%{!?with_%{1}:0}}
%without() %{expand:%%{?with_%{1}:0}%%{!?with_%{1}:1}}
# Handle conditional builds. %bcond_with is for case when feature is
# default off and needs to be activated with --with ... command line
# switch. %bcond_without is for the dual case.
#
# %bcond_with foo defines symbol with_foo if --with foo was specified on
# command line.
# %bcond_without foo defines symbol with_foo if --without foo was *not*
# specified on command line.
#
# For example (spec file):
#
# (at the beginning)
# %bcond_with extra_fonts
# %bcond_without static
# (and later)
# %if %{with extra_fonts}
# ...
# %else
# ...
# %endif
# %if ! %{with static}
# ...
# %endif
# %ifdef %{with static}
# ...
# %endif
# %{?with_static: ... }
# %{!?with_static: ... }
# %{?with_extra_fonts: ... }
# %{!?with_extra_fonts: ... }
#
# The bottom line: never use without_foo, _with_foo nor _without_foo, only
# with_foo. This way changing default set of bconds for given spec is just
# a matter of changing single line in it and syntax is more readable.
%bcond_with() %{expand:%%{?_with_%{1}:%%global with_%{1} 1}}
%bcond_without() %{expand:%%{!?_without_%{1}:%%global with_%{1} 1}}
#
#==============================================================================
# ---- Required rpmrc macros.
# Macros that used to be initialized as a side effect of rpmrc parsing.
# These are the default values that can be overridden by other
# (e.g. per-platform, per-system, per-packager, per-package) macros.
#
# The directory where sources/patches will be unpacked and built.
%_builddir %{_topdir}/BUILD
# The interpreter used for build scriptlets.
%_buildshell /bin/sh
# The path to the bzip2 executable (legacy, use %{__bzip2} instead).
%_bzip2bin %{__bzip2}
# The location of the rpm database file(s).
%_dbpath %{_var}/lib/rpm
# The location of the rpm database file(s) after "rpm --rebuilddb".
%_dbpath_rebuild %{_dbpath}
#
# Path to script that creates debug symbols in a /usr/lib/debug
# shadow tree.
%__debug_install_post \
/usr/lib/rpm/find-debuginfo.sh %{_builddir}/%{?buildsubdir}\
%{nil}
# Template for debug information sub-package.
%debug_package \
%ifnarch noarch\
%global __debug_package 1\
%package debug\
Summary: Debug information for package %{name}\
Group: Development/Debug\
AutoReqProv: 0\
%description debug\
This package provides debug information for package %{name}.\
Debug information is useful when developing applications that use this\
package or when debugging this package.\
%files debug -f debugfiles.list\
%defattr(-,root,root)\
%endif\
%{nil}
%_defaultdocdir %{_usr}/doc
# The path to the gzip executable (legacy, use %{__gzip} instead).
%_gzipbin %{__gzip}
# The number of changelog entries kept when installing (legacy, unused in
# rpm-4.0.1 and later).
%_instchangelog 5
# The path to the pgp executable (legacy, use %{__pgp} instead).
%_pgpbin %{__pgp}
# The directory where newly built binary packages will be written.
%_rpmdir %{_topdir}/RPMS
# A template used to generate the output binary package file name
# (legacy).
%_rpmfilename %{_build_name_fmt}
# The default signature type.
%_signature gpg
# The directory where sources/patches from a source package will be
# installed. This is also where sources/patches are found when building.
%_sourcedir %{_topdir}/SOURCES
# The directory where the spec file from a source package will be
# installed.
%_specdir %{_topdir}/SPECS
# The directory where newly built source packages will be written.
%_srcrpmdir %{_topdir}/SRPMS
# Directory where temporaray files can be created.
%_tmppath %{_var}/tmp
# Path to top of build area.
%_topdir %{_usrsrc}/redhat
# The path to the unzip executable (legacy, use %{__unzip} instead).
%_unzipbin %{__unzip}
#==============================================================================
# ---- Optional rpmrc macros.
# Macros that are initialized as a side effect of rpmrc and/or spec
# file parsing.
#
# Configurable build root path, same as BuildRoot: in a specfile.
# (Note: the configured macro value will override the spec file value).
#
#%buildroot
# The sub-directory (relative to %{_builddir}) where sources are compiled.
# This macro is set after processing %setup, either explicitly from the
# value given to -n or the default name-version.
#
#%buildsubdir
# Configurable distribution information, same as Distribution: tag in a
# specfile.
#
#%distribution
# Configurable distribution URL, same as DistURL: tag in a specfile.
# The URL will be used to supply reliable information to tools like
# rpmfind.
#
# Note: You should not configure with disturl (or build packages with
# the DistURL: tag) unless you are willing to supply content in a
# yet-to-be-determined format at the URL specified.
#
#%disturl
# Boolean (i.e. 1 == "yes", 0 == "no") that controls whether files
# marked as %doc should be installed.
#%_excludedocs
# The port and machine name of a FTP proxy host running TIS firewall.
#
#%_ftpport
#%_ftpproxy
# The signature to use and the location of configuration files for
# signing packages with GNU gpg.
#
#%_gpg_name
#%_gpg_path
# The port and machine name of an HTTP proxy host.
#
#%_httpport
#%_httpproxy
# The PATH put into the environment before running %pre/%post et al.
#
%_install_script_path /sbin:/bin:/usr/sbin:/usr/bin:/usr/X11R6/bin
# A colon separated list of desired locales to be installed;
# "all" means install all locale specific files.
#
%_install_langs all
# The value of CLASSPATH in build scriptlets (iff configured).
#
#%_javaclasspath all
# Import packaging conventions from jpackage.org (prefixed with _
# to avoid name collisions).
#
%_javadir %{_datadir}/java
%_javadocdir %{_datadir}/javadoc
#
# Deprecated.
#
#%_langpatt
# A colon separated list of paths where files should *not* be installed.
# Usually, these are network file system mount points.
#
#%_netsharedpath
# (experimental)
# The type of pattern match used on rpmdb iterator selectors:
# "default" simple glob-like regex, periods will be escaped,
# splats will have period prepended, full "^...$" match
# required. Also, file path tags will use glob(7).
# "strcmp" compare strings
# "regex" regex(7) patterns using regcomp(3)/regexec(3)
# "glob" glob(7) patterns using fnmatch(3)
#
%_query_selector_match default
# Configurable packager information, same as Packager: in a specfile.
#
#%packager
# Compression type and level for source/binary package payloads.
# "w9.gzdio" gzip level 9 (default).
# "w9.bzdio" bzip2 level 9.
#
#%_source_payload w9.gzdio
#%_binary_payload w9.gzdio
# The signature to use and the location of configuration files for
# signing packages with PGP.
#
#%_pgp_name
#%_pgp_path
# Configurable vendor information, same as Vendor: in a specfile.
#
#%vendor
#==============================================================================
# ---- Build configuration macros.
#
# Package version macro.
# The type of package to produce, for compatibility with legacy
# versions of rpm.
#
# This is an rpm version, e.g. 30005 means to produce packaging compatible
# with rpm-3.0.5. At the moment, values < 30005 (i.e. compatibility with
# version before rpm-3.0.5) are not supported. The only incompatible change
# in rpm packaging since rpm-3.0.5 has been to replace a 3 with a 4 in the
# rpmlead, so there's little need to use any value greater than 30005.
#
%_package_version 30005
#
# Script gets packaged file list on input and buildroot as first parameter.
# Returns list of unpackaged files, i.e. files in $RPM_BUILD_ROOT not packaged.
#
# Note: Disable (by commenting out) for legacy compatibility.
%__check_files /usr/lib/rpm/check-files %{buildroot}
#
# Should unpackaged files in a build root terminate a build?
#
# Note: The default value should be 0 for legacy compatibility.
%_unpackaged_files_terminate_build 1
#
# Should missing %doc files in the build directory terminate a build?
#
# Note: The default value should be 0 for legacy compatibility.
%_missing_doc_files_terminate_build 1
#
# Use internal dependency generator rather than external helpers?
%_use_internal_dependency_generator 1
#
# Filter GLIBC_PRIVATE Provides: and Requires:
%_filter_GLIBC_PRIVATE 0
# Desired selinux policy tree
%__policy_tree %{expand:%%global __policy_tree %{lua:\
t="targeted"\
f = io.open("/etc/selinux/config")\
if f then\
for l in f:lines() do\
if "SELINUXTYPE=" == string.sub(l,0,12) then t=string.sub(l,13); end\
end\
f:close()\
end\
print (t)\
}}%{__policy_tree}
# Path to selinux file context patterns.
%__file_context_path /etc/selinux/%{__policy_tree}/contexts/files/file_contexts
#
# Path to selinux file context patterns used to add
# RPMTAG_FILECONTEXTS to packages when building.
#
# Undefined, missing or %{nil} will disable.
%_build_file_context_path %{nil}
#
# Path to selinux file context patterns used to set
# (or override package content) file contexts when installing.
#
# Undefined, missing or %{nil} will use package content (if available).
%_install_file_context_path %{__file_context_path}
#
# Path to selinux file context patterns used to verify
# file contexts on file system.
#
# Undefined, missing or %{nil} will use package content (if available).
%_verify_file_context_path %{__file_context_path}
#
# Path to scripts to autogenerate package dependencies,
#
# Note: Used iff _use_internal_dependency_generator is zero.
#%__find_provides /usr/lib/rpm/rpmdeps --provides
#%__find_requires /usr/lib/rpm/rpmdeps --requires
%__find_provides /usr/lib/rpm/find-provides
%__find_requires /usr/lib/rpm/find-requires
#%__find_conflicts ???
#%__find_obsoletes ???
#
# Path to scripts to autogenerate per-interpreter package dependencies,
#
# Note: Used iff _use_internal_dependency_generator is non-zero. The
# helpers are also used by /usr/lib/rpm/rpmdeps {--provides|--requires}.
#%__perl_provides /usr/lib/rpm/perldeps.pl --provides
#%__perl_requires /usr/lib/rpm/perldeps.pl --requires
%__perl_provides /usr/lib/rpm/perl.prov
%__perl_requires /usr/lib/rpm/perl.req
%__python_provides /usr/lib/rpm/pythondeps.sh --provides
%__python_requires /usr/lib/rpm/pythondeps.sh --requires
%__mono_provides /usr/lib/rpm/mono-find-provides %{_builddir}/%{?buildsubdir} %{buildroot} %{_libdir}
%__mono_requires /usr/lib/rpm/mono-find-requires %{_builddir}/%{?buildsubdir} %{buildroot} %{_libdir}
#
# fixowner, fixgroup, and fixperms are run at the end of hardcoded setup
# These macros are necessary only for legacy compatibility, and have moved
# to per-platform macro configuration (i.e. /usr/lib/rpm/<arch>-<os>/macros)
#
# Note: These are no longer enabled by default.
#%__id_u %{__id} -u
#%__chown_Rhf %{__chown} -Rhf
#%__chgrp_Rhf %{__chgrp} -Rhf
#%_fixowner [ `%{__id_u}` = '0' ] && %{__chown_Rhf} root
#%_fixgroup [ `%{__id_u}` = '0' ] && %{__chgrp_Rhf} root
#%_fixperms %{__chmod} -Rf a+rX,u+w,g-w,o-w
#
#==============================================================================
# ---- Database configuration macros.
# Macros used to configure Berkley db parameters.
#
# rpmdb macro configuration values are a colon (or white space) separated
# list of tokens, with an optional '!' negation to explicitly disable bit
# values, or a "=value" if a parameter. A per-tag value is used (e.g.
# %_dbi_config_Packages) if defined, otherwise a per-rpmdb default
# (e.g. %_dbi_config). The configuration is also conditioned on the
# existence of an internal %{_rpmdb_rebuild} switch to permit changing
# the configuration while rebuilding an rpmdb database.
#
# The rpmdb configuration tokens are in a popt table in rpmdb/dbconfig.c,
# see that for the latest gory details. Note carefully that, unless you
# are writing an rpm installer, you shouldn't have to touch *any* of these
# parameters.
#
# Here's a short list of the tokens, with a guess of whether the option is
# useful:
# (nothing) currently used in rpm, known to work.
# "+++" under development, will be supported in rpm eventually.
# "???" I have no clue, you're mostly on your own.
#
# If you do find yourself inclined to fiddle, here's what I see (shrug):
# 1) Only the value of mp_size has any serious impact on overall performance,
# and you will need ~256Kb to handle a typical machine install.
# 2) Only the Packages hash, because of the size of the values (i.e. headers),
# will ever need tuning. Diddle the pagesize if you're interested, although
# I believe that you will find pagesize=512 "best".
# 3) Adding nofsync increases speed, but risks total data loss. Fiddle shared
# and/or mp_size instead.
# 4) btree is faster than hash, but would require some painful rpm release
# engineering to convert everbody's databases to btree, not gonna happen
# soon.
#
# See the db3-devel package, or http://www.sleepycat.com for Berkeley db-3.x
# documentation.
#
# token works? Berkeley db flag or value
#==================================================
#---------------------- DBENV->open parameters and tunable values:
# mmapsize=16Mb DBENV->set_mp_mmapsize
# cachesize=1Mb DBENV->set_cachesize, DB->set_cachesize
#---------------------- DBENV->open and DB->open common bits:
# create DB_CREATE
# thread ??? DB_THREAD (useless w/o posix mutexes on linux)
#---------------------- DBENV->open bits:
# joinenv DB_JOIN_ENV
# mpool DB_INIT_MPOOL
# cdb +++ DB_INIT_CDB
# txn ??? DB_INIT_TXN
# log ??? DB_INIT_LOG
# lock ??? DB_INIT_LOCK
# recover ??? DB_RECOVER
# recover_fatal ??? DB_RECOVER_FATAL
# use_environ ??? DB_USE_ENVIRON
# use_environ_root ??? DB_USE_ENVIRON_ROOT
# private +++ DB_PRIVATE
# lockdown ??? DB_LOCKDOWN
# shared +++ DB_SYSTEM_MEM
#---------------------- DB->open parameters and tunable values:
# pagesize=512 +++ DB->set_pagesize
#---------------------- DB->open bits:
# excl ??? DB_EXCL
# nommap ??? DB_NOMMAP
# rdonly DB_RDONLY
#---------------------- DB->open types:
# btree DB_BTREE
# hash DB_HASH
# recno ??? DB_RECNO
# queue ??? DB_QUEUE
# unknown +++ DB_UNKNOWN
#---------------------- DB->set_flags bits:
# bt_dup +++ (btree only) DB_DUP
# bt_dupsort +++ (btree only) DB_DUPSORT
# ht_dup +++ (hash only) DB_DUP
# ht_dupsort +++ (hash only) DB_DUPSORT
#----------------------- rpmdb specific configuration:
# usedbenv (always on) Use db3 environment?
# verify (db3 only) Verify Packages db after RW close?
# lockdbfd (always on for Packages) Use fcntl(2) locking ?
# nofsync Disable fsync(2) call performed after db3 writes?
# temporary Unlink file when closing.
#
# XXX Use transactions and logs for rpmdb durability (no clue yet):
#%__dbi_other create joinenv mpool txn log \
# mp_mmapsize=8Mb mp_size=512Kb
# Use a CDB database model for concurrent access.
# XXX Add "private" here for legacy interoperation transiting to glibc+nptl.
%__dbi_cdb create cdb mpool mp_mmapsize=16Mb mp_size=1Mb
%__dbi_other %{?_tmppath:tmpdir=%{_tmppath}} %{?__dbi_cdb}
# Note: adding nofsync here speeds up --rebuilddb a lot.
%__dbi_rebuild nofsync !log !txn !cdb
%__dbi_transient %{__dbi_rebuild} temporary private
%__dbi_perms perms=0644
#
#--- Hash database configuration
%__dbi_htconfig \
hash \
%{__dbi_other}\
%{__dbi_perms}\
%{nil}
%__dbi_htconfig_current %{__dbi_htconfig}
%__dbi_htconfig_rebuild %{__dbi_htconfig} %{__dbi_rebuild}
%_dbi_htconfig \
%{?_rpmdb_rebuild:%{__dbi_htconfig_rebuild}}\
%{!?_rpmdb_rebuild:%{__dbi_htconfig_current}}\
%{nil}
#
#--- Btree database configuration
%__dbi_btconfig \
btree \
%{__dbi_other}\
%{__dbi_perms}\
%{nil}
%__dbi_btconfig_current %{__dbi_btconfig}
%__dbi_btconfig_rebuild %{__dbi_btconfig} %{__dbi_rebuild}
%_dbi_btconfig \
%{?_rpmdb_rebuild:%{__dbi_btconfig_rebuild}}\
%{!?_rpmdb_rebuild:%{__dbi_btconfig_current}}\
%{nil}
# The list of tags for which indices will be built.
%_dbi_tags Packages:Name:Basenames:Group:Requirename:Providename:Conflictname:Triggername:Dirnames:Requireversion:Provideversion:Installtid:Sigmd5:Sha1header:Filemd5s:Depends:Pubkeys
# "Packages" should have shared/exclusive fcntl(2) lock using "lockdbfd".
%_dbi_config_Packages %{_dbi_htconfig} lockdbfd
# "Depends" is a per-transaction cache of known dependency resolutions.
%_dbi_config_Depends %{_dbi_htconfig} temporary private
%_dbi_config_Dirnames %{_dbi_btconfig}
%_dbi_config_Requireversion %{_dbi_btconfig}
%_dbi_config_Provideversion %{_dbi_btconfig}
%_dbi_config_Installtid %{_dbi_btconfig}
%_dbi_config_Removetid %{_dbi_btconfig}
%_dbi_config %{_dbi_htconfig}
# XXX legacy configuration.
# Choose db interface:
# 3 native db3 interface.
#
# There are two macros so that --rebuilddb can convert db1 -> db3.
#
%_dbapi 3
%_dbapi_rebuild 3
#==============================================================================
# ---- GPG/PGP/PGP5 signature macros.
# Macro(s) to hold the arguments passed to GPG/PGP for package
# signing and verification.
#
%__gpg_check_password_cmd %{__gpg} \
gpg --batch --no-verbose --passphrase-fd 3 -u "%{_gpg_name}" -so -
%__pgp_check_password_cmd %{__pgp} \
pgp +batchmode=on +verbose=0 "%{_pgp_name}" -sf
%__pgp5_check_password_cmd %{__pgp} \
pgps +batchmode=on +verbose=0 +armor=off "%{_pgp_name}" -f
%__gpg_sign_cmd %{__gpg} \
gpg --batch --no-verbose --no-armor --passphrase-fd 3 --no-secmem-warning \
-u "%{_gpg_name}" -sbo %{__signature_filename} %{__plaintext_filename}
%__pgp_sign_cmd %{__pgp} \
pgp +batchmode=on +verbose=0 +armor=off \
"+myname=%{_pgp_name}" -sb %{__plaintext_filename} %{__signature_filename}
%__pgp5_sign_cmd %{__pgp} \
pgps +batchmode=on +verbose=0 +armor=off \
"+myname=%{_pgp_name}" -b %{__plaintext_filename} -o %{__signature_filename}
# XXX rpm-4.1 verifies signatures using beecrypt.
#%__gpg_verify_cmd %{__gpg} \
# gpg --batch --no-verbose --verify --no-secmem-warning \
# %{__signature_filename} %{__plaintext_filename}
#%__pgp_verify_cmd %{__pgp} \
# pgp +batchmode=on +verbose=0 \
# %{__signature_filename} %{__plaintext_filename}
#%__pgp5_verify_cmd %{__pgp} \
# pgpv +batchmode=on +verbose=0 \
# +OutputInformationFD=1 +OutputWarningFD=1 \
# -o %{__signature_filename} %{__plaintext_filename}
#
# XXX rpm-4.1 verifies prelinked libraries using a prelink undo helper.
# Normally this macro is defined in /etc/rpm/macros.prelink, installed
# with the prelink package. If the macro is undefined, then prelinked
# shared libraries contents are MD5 digest verified (as usual), rather
# than MD5 verifying the output of the prelink undo helper.
#
# Note: The 2nd token is used as argv[0] and "library" is a
# placeholder that will be deleted and replaced with the appropriate
# library file path.
#%__prelink_undo_cmd /usr/sbin/prelink prelink -y library
# Horowitz Key Protocol server configuration
#
#_hkp_keyserver hkp://pgp.mit.edu
#_hkp_keyserver_query %{_hkp_keyserver}/pks/lookup?op=get&search=0x
#==============================================================================
# ---- Transaction macros.
# Macro(s) used to parameterize transactions.
#
# The output binary package file name template used when building
# binary packages.
#
# XXX Note: escaped %% for use in headerSprintf()
%_build_name_fmt %%{ARCH}/%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
# The default transaction color. This value is a set of bits to
# determine file and dependency affinity for this arch.
# 0 uncolored (i.e. use only arch as install hint)
# 1 Elf32 permitted
# 2 Elf64 permitted
%_transaction_color 3
# A default autorelocation path prefixed to file paths of packages
# that have an incompatible arch. This is used on ia64 to prefix
# /emul/ia32 to i386 file paths, and nowhere else (yet).
#
# XXX Note: escaped %% for use in headerSprintf()
%_autorelocate_path %{nil}
# A default directory color to choose when directories are
# auto-relocated.
%_autorelocate_dcolor 0
# The path to the dependency universe database. The default value
# is the rpmdb-redhat location. The macro is usually defined in
# /etc/rpm/macros.solve, installed with the rpmdb-redhat package.
#%_solve_dbpath /usr/lib/rpmdb/%{_arch}-%{_vendor}-%{_os}/redhat
# The path to the dependency universe packages. This should
# be a path to the packages contained in the solve database.
#%_solve_pkgsdir /mnt/redhat/test/latest-i386/RedHat/RPMS/
# The output binary package file name template used when suggesting
# binary packages that solve a dependency. The macro is usually defined
# in /etc/rpm/macros.solve, installed with the rpmdb-redhat package.
#
# XXX Note: escaped %% for use in headerSprintf()
#%_solve_name_fmt %{?_solve_pkgsdir}%%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
# The output binary package file name template used when repackaging
# erased packages.
#
# XXX Note: escaped %% for use in headerSprintf()
%_repackage_name_fmt %%{NAME}-%%{VERSION}-%%{RELEASE}.%%{ARCH}.rpm
# The directory in which erased packages will be saved when using
# the --repackage option.
%_repackage_dir /var/spool/repackage
# A path (i.e. URL) prefix that is pre-pended to %{_repackage_dir}.
%_repackage_root %{nil}
# If non-zero, all erasures will be automagically repackaged.
%_repackage_all_erasures 0
# If non-zero, a failed transaction will be automagically rolled
# back (sans, the failing transaction element).
%_rollback_transaction_on_failure 0
# Verify digest/signature flags for various rpm modes:
# 0x30300 (_RPMVSF_NODIGESTS) --nohdrchk if set, don't check digest(s)
# 0xc0c00 (_RPMVSF_NOSIGNATURES) --nosignature if set, don't check signature(s)
# 0xf0000 (_RPMVSF_NOPAYLOAD) --nolegacy if set, check header+payload (if possible)
# 0x00f00 (_RPMVSF_NOHEADER) --nohdrchk if set, don't check rpmdb headers
#
# For example, the value 0xf0c00 (=0xf0000+0xc0c00) disables legacy
# digest/signature checking, disables signature checking, but attempts
# digest checking, also when retrieving headers from the database.
#
# You also can do:
# >>> hex(rpm._RPMVSF_NOSIGNATURES)
# '0xc0c00'
# or:
# >>> hex(rpm._RPMVSF_NOSIGNATURES|rpm._RPMVSF_NOPAYLOAD)
# '0xf0c00'
# at the python prompt for example, after "import rpm".
#
# The checking overhead is ~11ms per header for digests/signatures;
# each header from the database is checked only when first encountered
# for each database open.
#
# Note: the %_vsflags_erase applies to --upgrade/--freshen modes as
# well as --erase.
#
%__vsflags 0xf0000
%_vsflags_build %{__vsflags}
%_vsflags_erase %{__vsflags}
%_vsflags_install %{__vsflags}
%_vsflags_query %{__vsflags}
%_vsflags_rebuilddb %{__vsflags}
%_vsflags_up2date %{__vsflags}
%_vsflags_verify %{__vsflags}
# Relations between package names that cause dependency loops
# with legacy packages that cannot be fixed. Relations are
# specified as
# p>q
# where package p has a Requires: on something that package q Provides:
#
# XXX Note: that there cannot be any whitespace within the string "p>q",
# and that both p and q are package names (i.e. no version/release).
#
%_dependency_whiteout \
%{nil}
#
# Default headerSprintf() output format string for rpm -qa
#
# XXX Note: escaped %% for use in headerSprintf()
%_query_all_fmt %%{name}-%%{version}-%%{release}
#
# Default path to the file used for transaction fcmtl lock.
#
# The previous, FHS clompliant, name was /var/lock/run/transaction,
# but the transaction lock needs to be per-database, not global, for
# some rpmdb operations.
#
# XXX Note: the file name is chosesn as __db.000 to expedite
# support issues, many users are doing "rm -f /var/lib/rpm/__db*"
# these days.
%_rpmlock_path %{_dbpath}/__db.000
#==============================================================================
# ---- Cache configuration macros.
# Macro(s) used to configure the universe of headers used to
# solve dependencies using rpmcache(8).
#
# Note: These values are specific to my machine, and most certainly
# are incorrect for any non-redhat.com machine. The macros are
# included here only to document the macro names and usage.
%_bhpath file://localhost/mnt/dist
%_bhcoll @(7.3|7.2|7.1|7.1sbe|7.1k|7.0|7.01j|7.0j|7.0sbe|7.0tc|6.2|6.2ha|6.2ee|6.1|6.0|5.2|5.1|5.0)
%_bhN @(SRPMS|i386|alpha|sparc|s390|ia64)
%_bhVR RedHat
%_bhA RPMS
# The cache database directory.
%_cache_dbpath /var/spool/up2date/cache
#==============================================================================
# ---- per-platform macros.
# Macros that are specific to an individual platform. The values here
# will be used if the per-platform macro file does not exist..
#
%_arch x86_64
%_build_arch x86_64
%_vendor redhat
%_os linux
%_gnu -gnu
%_target_platform %{_target_cpu}-%{_vendor}-%{_target_os}%{?_gnu}
#
# Define a generic value for optflags. Normally overridden by per-target macros.
%optflags -O2
#
# Define per-arch and per-os defaults. Normally overridden by per-target macros.
%__arch_install_post %{nil}
%__os_install_post %{___build_post}
#==============================================================================
# ---- Scriptlet template templates.
# Global defaults used for building scriptlet templates.
#
%___build_shell %{?_buildshell:%{_buildshell}}%{!?_buildshell:/bin/sh}
%___build_args -e
%___build_cmd %{?_sudo:%{_sudo} }%{?_remsh:%{_remsh} %{_remhost} }%{?_remsudo:%{_remsudo} }%{?_remchroot:%{_remchroot} %{_remroot} }%{___build_shell} %{___build_args}
%___build_pre \
RPM_SOURCE_DIR=\"%{u2p:%{_sourcedir}}\"\
RPM_BUILD_DIR=\"%{u2p:%{_builddir}}\"\
RPM_OPT_FLAGS=\"%{optflags}\"\
RPM_ARCH=\"%{_arch}\"\
RPM_OS=\"%{_os}\"\
export RPM_SOURCE_DIR RPM_BUILD_DIR RPM_OPT_FLAGS RPM_ARCH RPM_OS\
RPM_DOC_DIR=\"%{_docdir}\"\
export RPM_DOC_DIR\
RPM_PACKAGE_NAME=\"%{name}\"\
RPM_PACKAGE_VERSION=\"%{version}\"\
RPM_PACKAGE_RELEASE=\"%{release}\"\
export RPM_PACKAGE_NAME RPM_PACKAGE_VERSION RPM_PACKAGE_RELEASE\
%{?buildroot:RPM_BUILD_ROOT=\"%{u2p:%{buildroot}}\"\
export RPM_BUILD_ROOT}\
%{?_javaclasspath:CLASSPATH=\"%{_javaclasspath}\"\
export CLASSPATH}\
\
%{verbose:set -x}%{!verbose:exec > /dev/null}\
umask 022\
cd %{u2p:%{_builddir}}\
#%___build_body %{nil}
%___build_post exit 0
%___build_template #!%{___build_shell}\
%{___build_pre}\
%{nil}
#%{___build_body}\
#%{___build_post}\
#%{nil}
#==============================================================================
# ---- Scriptlet templates.
# Macro(s) that expand to a command and script that is executed.
# CAVEAT: All macro expansions must fit in a BUFSIZ (8192 byte) buffer.
#
%__spec_prep_shell %{___build_shell}
%__spec_prep_args %{___build_args}
%__spec_prep_cmd %{___build_cmd}
%__spec_prep_pre %{___build_pre}
%__spec_prep_body %{___build_body}
%__spec_prep_post %{___build_post}
%__spec_prep_template #!%{__spec_prep_shell}\
%{__spec_prep_pre}\
%{nil}
#%{__spec_prep_body}\
#%{__spec_prep_post}\
#%{nil}
%__spec_build_shell %{___build_shell}
%__spec_build_args %{___build_args}
%__spec_build_cmd %{___build_cmd}
%__spec_build_pre %{___build_pre}
%__spec_build_body %{___build_body}
%__spec_build_post %{___build_post}
%__spec_build_template #!%{__spec_build_shell}\
%{__spec_build_pre}\
%{nil}
#%{__spec_build_body}\
#%{__spec_build_post}\
#%{nil}
%__spec_install_shell %{___build_shell}
%__spec_install_args %{___build_args}
%__spec_install_cmd %{___build_cmd}
%__spec_install_pre %{___build_pre}
%__spec_install_body %{___build_body}
%__spec_install_post\
%{?__debug_package:%{__debug_install_post}}\
%{__arch_install_post}\
%{__os_install_post}\
%{nil}
%__spec_install_template #!%{__spec_install_shell}\
%{__spec_install_pre}\
%{nil}
#%{__spec_install_body}\
#%{__spec_install_post}\
#%{nil}
%__spec_check_shell %{___build_shell}
%__spec_check_args %{___build_args}
%__spec_check_cmd %{___build_cmd}
%__spec_check_pre %{___build_pre}
%__spec_check_body %{___build_body}
%__spec_check_post %{___build_post}
%__spec_check_template #!%{__spec_check_shell}\
%{__spec_check_pre}\
%{nil}
#%{__spec_check_body}\
#%{__spec_check_post}\
#%{nil}
#%__spec_autodep_shell %{___build_shell}
#%__spec_autodep_args %{___build_args}
#%__spec_autodep_cmd %{___build_cmd}
#%__spec_autodep_pre %{___build_pre}
#%__spec_autodep_body %{___build_body}
#%__spec_autodep_post %{___build_post}
#%__spec_autodep_template #!%{__spec_autodep_shell}\
#%{__spec_autodep_pre}\
#%{nil}
#%{__spec_autodep_body}\
#%{__spec_autodep_post}\
#%{nil}
%__spec_clean_shell %{___build_shell}
%__spec_clean_args %{___build_args}
%__spec_clean_cmd %{___build_cmd}
%__spec_clean_pre %{___build_pre}
%__spec_clean_body %{___build_body}
%__spec_clean_post %{___build_post}
%__spec_clean_template #!%{__spec_clean_shell}\
%{__spec_clean_pre}\
%{nil}
#%{__spec_clean_body}\
#%{__spec_clean_post}\
#%{nil}
%__spec_rmbuild_shell %{___build_shell}
%__spec_rmbuild_args %{___build_args}
%__spec_rmbuild_cmd %{___build_cmd}
%__spec_rmbuild_pre %{___build_pre}
%__spec_rmbuild_body %{___build_body}
%__spec_rmbuild_post %{___build_post}
%__spec_rmbuild_template #!%{__spec_rmbuild_shell}\
%{__spec_rmbuild_pre}\
%{nil}
#%{__spec_rmbuild_body}\
#%{__spec_rmbuild_post}\
#%{nil}
# XXX We don't expand pre/post install scriptlets (yet).
#%__spec_pre_pre %{nil}
#%__spec_pre_post %{nil}
#%__spec_post_pre %{nil}
#%__spec_post_post %{nil}
#%__spec_preun_pre %{nil}
#%__spec_preun_post %{nil}
#%__spec_postun_pre %{nil}
#%__spec_postun_post %{nil}
#%__spec_triggerpostun_pre %{nil}
#%__spec_triggerpostun_post %{nil}
#%__spec_triggerun_pre %{nil}
#%__spec_triggerun_post %{nil}
#%__spec_triggerin_pre %{nil}
#%__spec_triggerin_post %{nil}
#==============================================================================
# ---- configure macros.
# Macro(s) slavishly copied from autoconf's config.status.
#
%_prefix /usr
%_exec_prefix %{_prefix}
%_bindir %{_exec_prefix}/bin
%_sbindir %{_exec_prefix}/sbin
%_libexecdir %{_exec_prefix}/libexec
%_datadir %{_prefix}/share
%_sysconfdir %{_prefix}/etc
%_sharedstatedir %{_prefix}/com
%_localstatedir %{_prefix}/var
%_lib lib
%_libdir %{_exec_prefix}/%{_lib}
%_includedir %{_prefix}/include
%_oldincludedir /usr/include
%_infodir %{_prefix}/info
%_mandir %{_prefix}/man
#==============================================================================
# ---- config.guess platform macros.
# Macro(s) similar to the tokens used by configure.
#
%_build %{_host}
%_build_alias %{_host_alias}
%_build_cpu %{_host_cpu}
%_build_vendor %{_host_vendor}
%_build_os %{_host_os}
%_host x86_64-redhat-linux-gnu
%_host_alias %{nil}
%_host_cpu x86_64
%_host_vendor redhat
%_host_os linux-gnu
%_target %{_host}
%_target_alias %{_host_alias}
%_target_cpu %{_host_cpu}
%_target_vendor %{_host_vendor}
%_target_os %{_host_os}
#==============================================================================
# ---- specfile macros.
# Macro(s) here can be used reliably for reproducible builds.
# (Note: Above is the goal, below are the macros under development)
#
# The configure macro does the following:
# optionally change to a subdirectory (not implemented).
# attempt to update config.guess and config.sub.
# run configure with correct prefix, platform, and CFLAGS.
# optionally restore current directory (not implemented).
# The configure macro should be invoked as %configure (rather than %{configure})
# because the rest of the arguments will be expanded using %*.
#
# This is the version of %configure used through rpm-3.0.4.
#%configure \
# %{?__libtoolize:[ -f configure.in ] && %{__libtoolize} --copy --force} \
# CFLAGS="%{optflags}" ./configure %{_target_platform} --prefix=%{_prefix}
#
#------------------------------------------------------------------------------
# This is an improved version of %configure (from PLD team).
%configure \
CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS ; \
CXXFLAGS="${CXXFLAGS:-%optflags}" ; export CXXFLAGS ; \
FFLAGS="${FFLAGS:-%optflags}" ; export FFLAGS ; \
./configure --host=%{_host} --build=%{_build} \\\
--target=%{_target_platform} \\\
--program-prefix=%{?_program_prefix} \\\
--prefix=%{_prefix} \\\
--exec-prefix=%{_exec_prefix} \\\
--bindir=%{_bindir} \\\
--sbindir=%{_sbindir} \\\
--sysconfdir=%{_sysconfdir} \\\
--datadir=%{_datadir} \\\
--includedir=%{_includedir} \\\
--libdir=%{_libdir} \\\
--libexecdir=%{_libexecdir} \\\
--localstatedir=%{_localstatedir} \\\
--sharedstatedir=%{_sharedstatedir} \\\
--mandir=%{_mandir} \\\
--infodir=%{_infodir}
#------------------------------------------------------------------------------
# The make install analogue of %configure:
%makeinstall \
make \\\
prefix=%{?buildroot:%{buildroot}}%{_prefix} \\\
exec_prefix=%{?buildroot:%{buildroot}}%{_exec_prefix} \\\
bindir=%{?buildroot:%{buildroot}}%{_bindir} \\\
sbindir=%{?buildroot:%{buildroot}}%{_sbindir} \\\
sysconfdir=%{?buildroot:%{buildroot}}%{_sysconfdir} \\\
datadir=%{?buildroot:%{buildroot}}%{_datadir} \\\
includedir=%{?buildroot:%{buildroot}}%{_includedir} \\\
libdir=%{?buildroot:%{buildroot}}%{_libdir} \\\
libexecdir=%{?buildroot:%{buildroot}}%{_libexecdir} \\\
localstatedir=%{?buildroot:%{buildroot}}%{_localstatedir} \\\
sharedstatedir=%{?buildroot:%{buildroot}}%{_sharedstatedir} \\\
mandir=%{?buildroot:%{buildroot}}%{_mandir} \\\
infodir=%{?buildroot:%{buildroot}}%{_infodir} \\\
install
#------------------------------------------------------------------------------
# The GNUconfigure macro does the following:
# update config.guess and config.sub.
# regenerate all autoconf/automake files
# optionally change to a directory (make the directory if requested).
# run configure with correct prefix, platform, and CFLAGS.
# optionally restore current directory.
#
# Based on autogen.sh from GNOME and orginal GNUconfigure
#
%GNUconfigure(MCs:) \
CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS; \
LDFLAGS="${LDFLAGS:-%{-s:-s}}" ; export LDFLAGS; \
%{-C:_mydir="`pwd`"; %{-M: %{__mkdir} -p %{-C*};} cd %{-C*}} \
dirs="`find ${_mydir} -name configure.in -print`"; export dirs; \
for coin in `echo ${dirs}` \
do \
dr=`dirname ${coin}`; \
if test -f ${dr}/NO-AUTO-GEN; then \
: \
else \
macrodirs=`sed -n -e 's,AM_ACLOCAL_INCLUDE(\(.*\)),\1,gp' < ${coin}`; \
( cd ${dr}; \
aclocalinclude="${ACLOCAL_FLAGS}"; \
for k in ${macrodirs}; do \
if test -d ${k}; then \
aclocalinclude="${aclocalinclude} -I ${k}"; \
##else \
## echo "**Warning**: No such directory \`${k}'. Ignored." \
fi \
done \
if grep "^AM_GNU_GETTEXT" configure.in >/dev/null; then \
if grep "sed.*POTFILES" configure.in >/dev/null; then \
: do nothing -- we still have an old unmodified configure.in \
else \
test -r ${dr}/aclocal.m4 || touch ${dr}/aclocal.m4; \
echo "no" | gettextize --force --copy; \
test -r ${dr}/aclocal.m4 && %{__chmod} u+w ${dr}/aclocal.m4; \
fi \
fi \
if grep "^AM_PROG_LIBTOOL" configure.in >/dev/null; then \
%{__libtoolize} --force --copy; \
fi \
aclocal ${aclocalinclude}; \
if grep "^AM_CONFIG_HEADER" configure.in >/dev/null; then \
%{__autoheader}; \
fi \
echo "Running automake --gnu ${am_opt} ..."; \
%{__automake} --add-missing --gnu ${am_opt}; \
%{__autoconf}; \
); \
fi \
done \
%{-C:${_mydir}}%{!-C:.}/configure %{_target_platform} --prefix=%{_prefix} --exec-prefix=%{_exec_prefix} --bindir=%{_bindir} --sbindir=%{_sbindir} --sysconfdir=%{_sysconfdir} --datadir=%{_datadir} --includedir=%{_includedir} --libdir=%{_libdir} --libexecdir=%{_libexecdir} --localstatedir=%{_localstatedir} --sharedstatedir=%{_sharedstatedir} --mandir=%{_mandir} --infodir=%{_infodir} %* ; \
%{-C:cd ${_mydir}; unset _mydir}
#------------------------------------------------------------------------------
# Useful perl macros (from Artur Frysiak <wiget@t17.ds.pwr.wroc.pl>)
#
# For example, these can be used as (from ImageMagick.spec from PLD site)
# [...]
# BuildPrereq: perl
# [...]
# %package perl
# Summary: libraries and modules for access to ImageMagick from perl
# Group: Development/Languages/Perl
# Requires: %{name} = %{version}
# %requires_eq perl
# [...]
# %install
# rm -fr $RPM_BUILD_ROOT
# install -d $RPM_BUILD_ROOT/%{perl_sitearch}
# [...]
# %files perl
# %defattr(644,root,root,755)
# %{perl_sitearch}/Image
# %dir %{perl_sitearch}/auto/Image
#
%requires_eq() %(LC_ALL="C" echo '%*' | xargs -r rpm -q --qf 'Requires: %%{name} = %%{epoch}:%%{version}\\n' | sed -e 's/ (none):/ /' -e 's/ 0:/ /' | grep -v "is not")
%perl_sitearch %(eval "`%{__perl} -V:installsitearch`"; echo $installsitearch)
%perl_sitelib %(eval "`%{__perl} -V:installsitelib`"; echo $installsitelib)
%perl_vendorarch %(eval "`%{__perl} -V:installvendorarch`"; echo $installvendorarch)
%perl_vendorlib %(eval "`%{__perl} -V:installvendorlib`"; echo $installvendorlib)
%perl_archlib %(eval "`%{__perl} -V:installarchlib`"; echo $installarchlib)
%perl_privlib %(eval "`%{__perl} -V:installprivlib`"; echo $installprivlib)
#------------------------------------------------------------------------------
# arch macro for all Intel i?86 compatibile processors
# (Note: This macro (and it's analogues) will probably be obsoleted when
# rpm can use regular expressions against target platforms in macro
# conditionals.
#
%ix86 i386 i486 i586 i686 pentium3 pentium4 athlon
#------------------------------------------------------------------------------
# arch macro for all supported ARM processors
%arm armv3l armv4b armv4l armv4tl armv5tel armv5tejl armv6l
#------------------------------------------------------------------------------
# arch macro for all supported Alpha processors
%alpha alpha alphaev56 alphaev6 alphaev67
#------------------------------------------------------------------------
# Use in %install to generate locale specific file lists. For example,
#
# %install
# ...
# %find_lang %{name}
# ...
# %files -f %{name}.lang
#
%find_lang /usr/lib/rpm/find-lang.sh %{buildroot}
# 